Payment & Shipping Terms:
|Name:||500L Two Stage Ultrapure Stainless Steel Reverse Osmosis||RO Membrane:||USA Filmtec Dow|
|Multiple -Choice Control Valve:||Automatic Or Manual||Recovery Rate:||50%-75%|
|Desalination Rate:||97%||Membrane Vessel:||FRP Or Stainless Steel|
|Feed Water TDS:||<2000mg/L Like Fresh Water||Operating Temperature:||5℃ - 39℃|
|Pump Optional:||Ling Xiao / CNP / Grundfos||Warranty:||1year|
pure and clear water filter system,
ultrapure water equipment
500L Two Stage Ultrapure Stainless Steel Reverse Osmosis RO Water Filtration System
|1.Imported USA DOW Membranes
2. CE and ISO Approved
3.97% salt rejection
4. Low pressure protection
|1. High rejection rate
2. Lower cost and easy operation.
3. Large Production capability, especially suitable
for commercial and industries.
4. Cleaning system is optional if necessary.
|Standard Main Components||Optional Components|
USA DOW Membranes
Two-stage RO system
Automatic cleaning system
PE,stainless steel or FRP water tank
1)Q:What is water purification?
Water purification generally means freeing water from any kind of impurity it contains, such as contaminants or micro organisms.
Water purification is not a very one-sided process; the purification process contains many steps. The steps that need to be progressed depend on the kind of impurities that are found in the water. This can differ very much for different types of water.
2)Q: What is the hardness of Kaiyuan's drinking water?
A: Hardness is a measure of the amount of minerals, i.e. calcium and magnesium, dissolved in water. The average hardness of water is 150mg per liter.A:Hardness is a measure of the amount of minerals, i.e. Calcium and magnesium, dissolved in water. The average hardness of water is 150mg per liter.
3)Q: Is it beneficial to have minerals in drinking water?
This is actually the biggest myth in the water industry. To understand the issue clearly, first we need to examine "what minerals" are in our tap water. If we were to send a sample of water to a testing laboratory, we would get back a report that includes calcium, magnesium, and sodium along with a list of other minerals and contaminants. While some of these mineral are safe and benign, there are also many toxic ones on this list including fluoride, arsenic, chromium and radium just to name a few. Unfortunately there are no filtration systems available that can differentiate between good and bad minerals. Basic carbon filter systems will leave in all the minerals, including the highly toxic and radioactive ones. On the other hand, RO systems will remove 90-99% of these undesirable contaminants.
The truth is the majority of healthy minerals our bodies need come from the food we eat and not from drinking water. The main concern with water is actually over toxicity, not mineral content. Whether water contains 1 or 100ppm (parts per million) calcium isn't really important, but the difference between 1 and 100ppm arsenic is of grave importance.
4)Q:When do we need to add a UV light to our system?
The primary use for a UV light is to disinfect filtered water at a certain flow rate. Bacteria, viruses, and other microorganisms are destroyed by the UV interfering with the DNA and RNA in the organisms' reproductive cycles.
If you are on well water, or if you suspect your water source is unsafe and want to have extra protection, then you can add a UV light to ensure safe drinking water.
Thank you so much for your value time.Any questions please feel free to contact me ! I will reply you within 24 hours.
Guidelines for getting a proper quotation
Tell us the raw water/source of water
Provide water analysis report
Required production capacity( 500 liters per hour, 1000liters per hour…)
What's the pure water used for( drinking, bottle water or industrial use…)
Contact Person: Sissie Chan