Water Softener System
INFRMATION OF THE MACHINE
| Mode |
KYRO-5000L/H |
| Power |
Around 30.0KW |
| Voltage |
380V/3ph/50Hz (customize available) |
| Desalination rate |
> 97% |
| Recovery rate |
50%-75% |
| Material |
FRP, Stainless Steel , U-PVC |
| Configurations |
CNP pump&USA DOW membrane |
| Certification |
CE & ISO & SGS |
Function description
| 1.Water softener use automatic control and semi-control .Pretreatment parts can adopt fiber glass or stainless steel material. |
| 2.Water softener system has protected when no power, poor power, larger electrical current, leakage, short circuit. |
| 3.Water softener price is compact, easy installation. |
| 4.Water softener equipped with manual and auto control based on user needed. |
| 5.Water softener system produce as per ISO and SGS standard and main parts accessories have obtained CE certification. |
| 6. All the plants will be commissioning well. Make sure don't have any problem when arrived site. |
| 7.What we provide not only the good products, but also our whole team, the quality, experience, and service. |
******************************************************************************************************************
Technical index and working
| 1.Water pressure:0.18-0.6Mpa |
| 2.Working temperature:1°c-55°c |
| 3.Hardness of raw water: <8mmol/L |
| 4.Operation method:manual/automatic |
| 5.Hardness of effluent water: ≤0.03mmol/L |
| 6.water flow: 0.3-20 t/h |
| 7.Rebirth method:resin |
| 8.Control method: time or flow |
| 9.Working electric: 100-220V,60/50Hz |
********************************************************************************************************************
Advantage
| 1. System can produce water continuously, PLC program controlled, Simple in installation and operation |
| 2. RO system be chosen the import USA DOW membrane |
| 3. Tank level control, automatic stop when the raw water tank without water or pure water tank is full |
| 4. RO system flushes RO membranes when it starts to work so that membrane fouling is reduced. |
| 5. Nanfang(CNP) high pressure pumps or Denmark Grundfos high pressure pumps are adopted. |
| 6. Product water quality is continuously monitored by conductivity meter. |
Application
| Electronic industry |
Pre-filter for ultra pure water, chemical products and pure water |
| Food & beverage industry |
filter for mineral water, wines and fruit juice, bottled drinking water |
| Medicine industry |
filter for drug liquid |
| Chemical industry |
filter for organic solvent |
| Petroleum industry |
filter for oil-field flooding |
*********************************************************************************************************************
Some parts function
| 1. Raw water pump: provide needed pressure for every pre-treatment filter; |
| 2. Quartz sand filter: use fiber glass as housing, fill quartz sand, it can filter big particles impurities, suspended substances, colloids etc. Important to remove iron and sediments you mentioned;^^ |
| 3. Activated carbon filter: use fiber glass as housing, fill activated carbon, remove color, odor, residual chlorine and organics substances; |
| 4. Security filter: prevent large particles, bacteria, viruses into RO membrane, accuracy is 5µm; |
| 5. High pressure pump: provide needed working pressure for RO system, ensure production capacity of pure water; |
| 6. RO system: can remove particles, colloids, organic impurities, heavy metal ions, bacteria, virus, heat source etc. harmful substances and 99% dissolved salts. |
| 7. UV Sterilizer(for direct drinking): kill bacteria , viruses , cell damage , atc... |
**********************************************************************************************************************
Functions:
1. High operation automation degree.
1) Automatic stopping in case of sufficient water under low pressure
a) Protection of hydraulic fluctuation resistance
b) Timed flushing of front filtering materials by automatic controller
c) Automatic flushing of reverse osmosis film by IC microcomputer controller
d) Automatic monitoring of water quality
2. Small landing area, low energy consumption, free of pollution, simple process, high water quality and easy operation and maintenance
3. High removing rate, above 97% for dissolved salts, above 98% for organic substances, and above98% for colloids, bacteria and heat sources etc.
**********************************************************************************************************************
Work process:
| The RO water system is adopt advanced technology , the RO water output rate is 1.5M3/HR. |
| The quartz sand filter can remove the suspend solid and improve the outlet water turbidity. |
| The activated carbon filters will remove color, odor, chlorine from the raw water. |
| After these two filters , the water will be through into the security filter which can remove the smaller suspended solids .Then water flow into RO system part cause by the boosting of high pressure pump. |
| The inlet water reach working pressure of the RO system part , then transport into to the pressure vessel which with RO membrane module .The water will be separated by the RO membrane and become two water current, the one is outlet pure water , the other one is dense water. |
| The pure water is transport to pure storage tank and the dense water is discharged to gutter after the adjustment of dense water valve and measurement of the measure meter. |
**********************************************************************************************************************
Feature:
| Operation pressure: 4.5 ~ 6.0 Mpa, desalination rate: 95 ~ 99% |
| Highly automation, stable operation, low fault rate and low operating cost |
| Apply to electronic, chemical, electric power, pharmaceutical and other industries of water preparation |
Optional Equipment Available
| a. Atmospheric storage tanks with level control and repressurization pump |
| b. Pressurized storage vessels |
| c. UV |
| d. Ozone generator |
| e. Membrane clean-in-place (CIP) systems |
| f. Pretreatment chemical injection systems |
Application Scope of Portable Purification System
| 1. Electronic industry Pre-filter for ultra pure water, chemical products and pure water |
| 2. Food and beverage industry Purification filter for mineral water, wines and fruit juice |
| 3. Medicine industry RO filter for drug making |
| 4. Chemical industry Desalination filter for organic solvent |
| 5. Petroleum industry RO purfilter for oil-field flooding |
*********************************************************************************************************************
System Performance
1. Main part (membrane) of reverse osmosis system is imported from USA.
2. Auto stop when no water and full water.
3. Auto controller, RO membrane auto flush to protect membrane.
4. Auto start when pure water tank have no water.
5. Low pressure protection switch to protect high pressure pump when there is no raw water.
6. High efficient and low noise high pressure pump.
7. Product water conductivity meter to monitor product water quality all the time.
8. Input water and output water pressure gauge to monitor RO membrane *differential pressure to remind it's time for chemical cleaning.
9. Inlet water solenoid valve to stop water when machine is stop.
***************************************************************************************************************
What's the information you need to know before order?
A:What's your raw water?
B:What's the capacity per hour of the equipment?C:How many hours do you need the machine work a day?
D:What's the application of purifier water?
E:Do you have raw water quality test report?What's your raw water TDS and hardness?
F:What is the power supply?(Such as 380V/50HZ,220V/50HZ etc;)
Your message must be between 20-3,000 characters!