Water Softener System
Type choice:
Softener equipment applies cation resin for softening raw water,its main target is to use cation resin to absorb(main parts of ),encreasing the hardness of raw water.
1. Users can choose manual operation control system for saving cost.
2. If users using for 24 hours can accord to water using time choosing for rebirth
3. Uses can according to water quality requirement:first grade multi-media filter,which can remove mud,rust,colloid and suspension in water.Second grade activated carbon filter,which can remove color,olfactory,biochemistry organic in water and encrease the left oxygen value and pollution in water.Third grade equipment softener equipment.
4. Effluent water capacity achieves the water supply of national low-pressure boiler.
5. Time control- type;flow control- type.In working ,apply single-tank,double-tank and multi-tank etc. other varied combination method.When choosing,users can choose as their needs.In operation,it has not only automatic function,but also is manual operation.
Function description
| 1.Water softener use automatic control and semi-control .Pretreatment parts can adopt fiber glass or stainless steel material. |
| 2.Water softener system has protected when no power, poor power, larger electrical current, leakage, short circuit. |
| 3.Water softener price is compact, easy installation. |
| 4.Water softener equipped with manual and auto control based on user needed. |
| 5.Water softener system produce as per ISO and SGS standard and main parts accessories have obtained CE certification. |
| 6. All the plants will be commissioning well. Make sure don't have any problem when arrived site. |
| 7.What we provide not only the good products, but also our whole team, the quality, experience, and service. |
******************************************************************************************************************
Technical index and working
| 1.Water pressure:0.18-0.6Mpa |
| 2.Working temperature:1°c-55°c |
| 3.Hardness of raw water: <8mmol/L |
| 4.Operation method:manual/automatic |
| 5.Hardness of effluent water: ≤0.03mmol/L |
| 6.water flow: 0.3-20 t/h |
| 7.Rebirth method:resin |
| 8.Control method: time or flow |
| 9.Working electric: 100-220V,60/50Hz |
Introduction
Ion exchange units that replace calcium and magnesium ions from water are known as water softeners. They may also remove varying amounts of other inorganic pollutants such as metals, but they will not remove organic chemicals, pathogens, particles, or radon gas. Water softener units work most efficiently with particulate-free water.
Principles of Ion Exchange to Soften Water
Calcium and magnesium ions are atoms having a positive electrical charge, as do sodium and potassium ions. Ions of the same charge can be exchanged. In the ion exchange process, a granular substance (usually a resin) that is coated with sodium or potassium ions comes into contact with water containing calcium and magnesium ions. Two positively charged sodium or potassium ions are exchanged (released into the water) for every calcium or magnesium ion that is held by the resin. This “exchange or trade” happens because sodium or potassium are loosely held by the resin. In this way, calcium and magnesium ions responsible for hardness are removed from the water, held by the resin, and replaced by sodium or potassium ions in the water. This process makes water “soft.” Eventually, a point is reached when very few sodium or potassium ions remain on the resin, thus no more calcium or magnesium ions can be removed from the incoming water. The resin at this point is said to be “exhausted” or “spent,” and must be “recharged” or “regenerated.”
********************************************************************************************************************
INFRMATION OF THE MACHINE
| Mode |
KYRO-20TPH |
| Power |
Around 30.0KW |
| Voltage |
380V/3ph/50Hz (customize available) |
| Desalination rate |
> 97% |
| Recovery rate |
50%-75% |
| Material |
FRP, Stainless Steel , U-PVC |
| Configurations |
CNP pump&USA DOW membrane |
| Certification |
CE & ISO & SGS |
Advantage
| 1. System can produce water continuously, PLC program controlled, Simple in installation and operation |
| 2. RO system be chosen the import USA DOW membrane |
| 3. Tank level control, automatic stop when the raw water tank without water or pure water tank is full |
| 4. RO system flushes RO membranes when it starts to work so that membrane fouling is reduced. |
| 5. Nanfang(CNP) high pressure pumps or Denmark Grundfos high pressure pumps are adopted. |
| 6. Product water quality is continuously monitored by conductivity meter. |
ADDITIONAL SYSTEMS :
Particle Filters
Cartridge and Bag Filters
Sand Filters
Activated Carbon Filters
Water Softeners
Brakish Water Reverse Osmosis Systems
Sea Water Reverse Osmosis Systems
Containerized Reverse Osmosis Systems
Ultrafiltration Systems
Ultraviolet Disinfection Systems
Degassing Systems
Deionization Systems
Surface (River) Water Treatment Systems
Waste Water Treatment Systems
Chemical Dosing Units
Application
| Electronic industry |
Pre-filter for ultra pure water, chemical products and pure water |
| Food & beverage industry |
filter for mineral water, wines and fruit juice, bottled drinking water |
| Medicine industry |
filter for drug liquid |
| Chemical industry |
filter for organic solvent |
| Petroleum industry |
filter for oil-field flooding |
*********************************************************************************************************************
Using RO machine advantage
1. After the machine is turned on, the device realizes the automatic film rinsing function, and the rinsing time is adjustable from 2 to 10 minutes.
2. The equipment has a wastewater return device, which can be used for secondary use of water to improve water utilization and save water costs.
3. Low-voltage protection system, when the source water pressure is insufficient or passive water, the equipment will automatically stop, protecting the high-pressure pump and equipment safety.
4. The equipment can be automatically shut down after the water tank is full.
5. The equipment is equipped with a cleaning and maintenance system, which can regularly clean and maintain the equipment and prolong the service life of the reverse osmosis membrane for 3-5 years.
6. The equipment adopts stainless steel frame structure to achieve no sanitary corners, and the equipment is non-corrosive. It is still as new as 10-20 years.
7. The two-stage reverse osmosis equipment is equipped with multi-way regulating valve, which can realize double-stage effluent, single-stage effluent or single-stage effluent at the same time, so that the water quality is diversified.
8. Reverse osmosis equipment can be used with mineral water equipment (mountain spring water equipment) to reduce investment costs and improve water resource utilization.
9, the equipment can basically achieve 24-hour unattended operation.
10. An online water quality detector is available to observe the water quality at any time.
*********************************************************************************************************************
- Product Processing: System Performance, Function, Application, Component...
Process: Raw water----raw water tank----raw water pump---quartz sand filter---activated carbon filter---water softener (optional)---security filter----high pressure pump---RO system---UV system (Ozone generator)---pure water tank
******************************************************************************************************************
Process: raw water tank + raw water pump + quartz sand filter + activated carbon filter + water softener/chemical dosing system(optional) + security filter + high pressure pump + ro system + pure water tank + UV sterilizer(ozone generator) + precision filter + water supply point
********************************************************************************************************************
Technical Flowchart of Reverse Osmosis Plant
Untreated water feed pump →Quartz sand filtration→ Active carbon filtration → Precise filtration → Softener→ High pressure pump →RO Membrane system→ CIP system → PLC system → Post Treatment (UV disinfection)
********************************************************************************************************************
Functions:
1. High operation automation degree.
1) Automatic stopping in case of sufficient water under low pressure
a) Protection of hydraulic fluctuation resistance
b) Timed flushing of front filtering materials by automatic controller
c) Automatic flushing of reverse osmosis film by IC microcomputer controller
d) Automatic monitoring of water quality
2. Small landing area, low energy consumption, free of pollution, simple process, high water quality and easy operation and maintenance
3. High removing rate, above 97% for dissolved salts, above 98% for organic substances, and above98% for colloids, bacteria and heat sources etc.
**********************************************************************************************************************
Work process:
| The RO water system is adopt advanced technology , the RO water output rate is 1.5M3/HR. |
| The quartz sand filter can remove the suspend solid and improve the outlet water turbidity. |
| The activated carbon filters will remove color, odor, chlorine from the raw water. |
| After these two filters , the water will be through into the security filter which can remove the smaller suspended solids .Then water flow into RO system part cause by the boosting of high pressure pump. |
| The inlet water reach working pressure of the RO system part , then transport into to the pressure vessel which with RO membrane module .The water will be separated by the RO membrane and become two water current, the one is outlet pure water , the other one is dense water. |
| The pure water is transport to pure storage tank and the dense water is discharged to gutter after the adjustment of dense water valve and measurement of the measure meter. |
**********************************************************************************************************************
Feature:
| Operation pressure: 4.5 ~ 6.0 Mpa, desalination rate: 95 ~ 99% |
| Highly automation, stable operation, low fault rate and low operating cost |
| Apply to electronic, chemical, electric power, pharmaceutical and other industries of water preparation |
Optional Equipment Available
| a. Atmospheric storage tanks with level control and repressurization pump |
| b. Pressurized storage vessels |
| c. UV |
| d. Ozone generator |
| e. Membrane clean-in-place (CIP) systems |
| f. Pretreatment chemical injection systems |
Application Scope of Portable Purification System
| 1. Electronic industry Pre-filter for ultra pure water, chemical products and pure water |
| 2. Food and beverage industry Purification filter for mineral water, wines and fruit juice |
| 3. Medicine industry RO filter for drug making |
| 4. Chemical industry Desalination filter for organic solvent |
| 5. Petroleum industry RO purfilter for oil-field flooding |
*********************************************************************************************************************
System Advantages
√. Main part (membrane) of reverse osmosis system is imported from USA.
√. Auto stop when no water and full water.
√. Auto controller, RO membrane auto flush to protect membrane.
√. Auto start when pure water tank have no water.
√. Low pressure protection switch to protect high pressure pump when there is no raw water.
√. High efficient and low noise high pressure pump.
√. Product water conductivity meter to monitor product water quality all the time.
√. Input water and output water pressure gauge to monitor RO membrane *differential pressure to remind it's time for chemical cleaning.
√. Inlet water solenoid valve to stop water when machine is stop.
Your message must be between 20-3,000 characters!