Payment & Shipping Terms:
|Name:||Industrial RO System 10T/H Water Treatment Plant||Pretreatment:||Quartz Sand/ Activated Carbon/ Security PP Filter|
|Application:||Drinking Water Treatment||RO Membrane:||DOW BW30-400IG|
|Electrical Power:||110V/220V/380V||Production Capacity:||10T/H|
|Tank Material:||FRP/ Stainless Steel||Pipe Fitting:||SUS304/ U-PVC|
|Control Valve:||Automatic/ Manual||Pump:||CNP|
|Size:||4000*900*1800mm||Optional:||PLC Touch Screen/ Regulating Wheels/ Two-stage RO System|
10TH Industrial Water Filter,
SUS304 RO Industrial Water Filter
10T/H Reverse Osmosis System/ Industrial Water Filter For Beverage
Reverse osmosis system is using city water as feed water.
Pre-treatment filters always contain quartz sand filter, activated carbon filter, water softener and security filter. Main purpose is to remove sludge, rust, colloid, suspended solids, color, odor, biochemical organic impurity in raw water. And pre-filters can also reduce water residual chlorine and pesticide and other harmful pollutions. If raw water in high hardness, we will need to add water softener to protect reverse osmosis membrane.
Description of RO unit
This system adopts mechanical and carbon filtration as pre-stage treatment. The device removes the sediments, organic substance, colloid, bacteria and other impurities in water. And the water can be pre-desalted by program control system. Most of the dissolved salt species material, bacteria and heat source can be removed by this method. Then use ozone preservation device to make sure that the water quality is up to the standard.
This system has both automatic and manual mode. The self-set program control system can implement the automatic running mode by regulating the transducer and pressure controller.
The basic working principle of reverse osmosis
1. Using a special high-pressure water pump, the raw water is added to a pressure of 6-20 kg, so that the raw water permeates through the reverse osmosis membrane with a pore diameter of only 0.0001 μm under the action of pressure.
2, Chemical ions and bacteria, fungi, virions can not pass, with the discharge of wastewater, only allow water molecules and solvents less than 0.0001 microns to pass.
3. The security filter is equipped with a filter element with a filter aperture of 5μm. These filters filter out any particles larger than 5μm.
4. The more common type of permeable membrane is a polyamide membrane, and the membrane type is a wound composite membrane. The membrane has a salt removal rate of 99.5%.
5, Because the RO membrane is susceptible to the pH value, residual chlorine and water temperature in the water, the RO membrane has strict requirements on the water quality before the operation:
PH value: 3~10
Residual chlorine value: <0.1mg/L
SDI15 value: <5.0
Water temperature: <45 °C
INFRMATION OF THE MACHINE
|Voltage||380V/3ph/50Hz (customize available)|
|Desalination rate||> 97%|
|Material||FRP, Stainless Steel , U-PVC|
|Configurations||CNP pump&USA DOW membrane|
|Certification||CE & ISO & SGS|
Some parts function
1.Raw water pump: provide needed pressure for every pre-treatment filter;
2.Quartz sand filter: use fiber glass as housing, fill quartz sand, it can filter big particles impurities, suspended substances, colloids etc. Important to remove iron and sediments you mentioned;^^
3.Activated carbon filter: use fiber glass as housing, fill activated carbon, remove color, odor, residual chlorine and organics substances;
4.Security filter: prevent large particles, bacteria, viruses into RO membrane, accuracy is 5µm;
5.High pressure pump: provide needed working pressure for RO system, ensure production capacity of pure water;
6.RO system: can remove particles, colloids, organic impurities, heavy metal ions, bacteria, virus, heat source etc. harmful substances and 99% dissolved salts.
|Electronic industry||Pre-filter for ultra pure water, chemical products and pure water|
|Food & beverage industry||filter for mineral water, wines and fruit juice, bottled drinking water|
|Medicine industry||filter for drug liquid|
|Chemical industry||filter for organic solvent|
|Petroleum industry||filter for oil-field flooding|
Technical Flowchart of Reverse Osmosis Plant
Untreated water feed pump →Quartz sand filtration→ Active carbon filtration → Precise filtration → High pressure pump →RO Membrane system→ CIP system → PLC system → Post Treatment (UV disinfection)
Thank you so much for your value time.Any questions please click "contact now" send us inquiry !We will reply you within 24 hours. Tel/whatsapp/wechat: +86-13660858152
Guidelines for getting a proper quotation
Tell us the raw water/source of water
Provide water analysis report
Required production capacity( 500 liters per hour, 1000liters per hour…)
What's the pure water used for( drinking, bottle water or industrial use…)
Contact Person: Rose Chen