Payment & Shipping Terms:
|Name:||PVC Security Filter||Micron:||0.1 Um , 0.22 Um , 0.45 Um , 1 Um|
|Size:||10 Inch / 20 Inch||Inlet/Outlet:||< 50 °C|
|Packing:||39.5*39.5*64cm/4pcs||Usage:||Residential RO System For Drinking Water|
|Warranty:||1year||Approved:||ISO9001, CE, SGS|
stainless steel filter tank,
high pressure pump
5um Micron Stainless Steel SUS 304 Precision Security Cartridge Filter Housing
|Cartridge filter, also known as security filters, generally set before the pressure vessel to remove the tiny particles whose turbidity above 1 degree, to meet the requirements of the follow-up process of water; sometimes, it is also set at the end of the entire water system to prevent small particles (such as broken resin) into the finished water.|
Precision filter housing Working Principle
|Cartridge filter, also known as security filter. The shell is made of high quality stainless steel, filter using molded filter, The liquid went through filter under pressure, residue left on the filter, and the filtrate outflow through the filter can effectively remove impurities in the water, sediment and suspended solids, bacteria.Molded filters are: cloth, screen, filter, sintered filter tube, wound filter, melt-blown filter, micro-porous filter and multi-function filter. Due to different filter, the filter pore size is not the same. Precision filter is between the sand filter (coarse) and a filter between ultra-filtration, filter pore size generally between 0.01-120um.For the same form of filter,it is divided into different models by their dimensions.|
Commonly used wound filter and meltblown filter
Wound filter (also known as honeycomb filter), there are two types: one is polypropylene fiber - polypropylene skeleton filtration, the maximum temperature 60 ℃; the other is cotton fiber - stainless steel frame filter, the maximum temperature 120 ℃.
Raw material of meltblown filter is polypropylene, the maximum operating temperature is 60 ℃. Sophisticated filters can remove suspended solids, colloidal substances and some fine particulate matter and so on.
Precision filter housing Characteristics
1.High filtration precision, uniform pore size filter.
2.Small filtration resistance, flux, interception capability, long service life.
3.Filter is clean and no second pollution to the filter media.
4.It also can filter acid, alkali and other chemical agents.
6.Low price, low running costs, easy to clean, filter can be replaced.
1.Food industry:fine filter of space water, mineral water,beverages, liquor clarification and filtration process.
2. Pharmaceutical industry: sterile water, oral, infusion and injection water treatment.
3. Electronics industry: water preparation semiconductors, instruments, picture tubes and other production plants, wash water filtration bar.
4. Chemical industry: organic solvents, esters, alcohols, acids, alkalis and other chemicals, oils purification.
5. Oil industry: oil field water injection preparation and so on.
6. Environmental protection, electroplating wastewater, printing waste, pharmaceutical waste and other industrial wastewater treatment.
7. Seawater, brackish water desalination water treatment, hotels, apartments water treatment.
8. Precision filter is often used as security filter for electrodialysis, ion exchange, security filters reverse osmosis devices.
Ways for replace cartridge
1. Shut off the filter, disassemble man hole cover.
2. Switch off screws on cartridge, take out cartridge. Clean filter inside.
3. Take off o-rings at both side of cartridge, clean and insert them to new cartridges. Notice: please soak new cartridge 30minutes before using to make sure it’s wet.
4. Insert cartridge at the socket.
5. Put press plate, tight screws.
6. Place top manhole cover. Run the filter.
7. Open inlet valve, vent valve to let filter house full of water.
Close vent valve, open drain valve, and to look at outlet water condition. When water turns into clear, then filter can through into operation.Remark: please wash new cartridge before using.
Contact Person: Rose Chen