Payment & Shipping Terms:
|RO Membrane:||USA DOW||Production Capacity:||6000liters Per Hour|
|Electrical Power:||220/380V 50/60Hz||Tank Material:||FRP/ Stainless Steel|
|Control Valve:||Automatic/ Manual||Pipe Fitting:||SUS304/ U-PVC|
|Warranty:||1 Year||Principle:||Anion / Cation Ion Exchange|
ion exchange water purifier,
ion exchange resin water filter
6000Lph Anion Exchange Resin /Weak Base Cation Ion Exchange
/ Mix Bed Ion Exchange Resin With Stainless Steel Tank
Working principle:Ion-exchange mixed-beded for water treatment
Mixed-bed for water treatment is working in electrolyte solution by exchanging resin to wipe off all kinds of
kation and anion, is a method to produce high purity water , which can not be substituted.Ion-exchange equipment is of kation exchanging equipment and anion equipment. When the raw water passing ion-exchange pole, the kation nd anion(HCO3-plasma ion)in water will exchange with H+ of positive resin and OH- of negative resin to get salt taking-off.The combination of kation and anion will get the water higher purified.
Our Mixed-bed with super acid resistant FRP inner liner, offers much better corrosion-resistant for your system. The continuous filament wound FRP makes the vessel more reliable and durable. Side lenses, different openings and very thoughtful design for detail, help to convenience for application; Series models meet your different requirement; Special design according to your sketch or description is available.
2. Product Details
kyro-6000lph Ion exchange equipment
1. Storage capacity:6 ton
3. Operating system:Manual Control
3. Materials: Stianless steel
4. Power supply:220V / 380V, 50Hz / 60Hz (optional depand difference area voltage using)
When raw water with rigid ion passing resin in the exchanging cylinder, Ca2+, Mg2+ in water is exchanged and absorbed by Na+ in resin, wiping off Ca2+, Mg2+ and carbonate or non carbonate rigidity, is called softened water.
The resin must be regenerated after absorbing some Ca2+ Mg2+, regeneration is washing resin layer using brine in salt box. Na+ in salt water exchange the rigid ion of resin into water, then discharged with regeneration liquid off the cylinder. Recovering exchanging capacity, and continuously softening water.
|1).Can produce pure water continuously and highly automatic|
|2).No need chemical to regeneration,easy operation|
|3).RO system uses imported USA DOW membrane|
|4).Automatic switch on when low water level,and switch off when high water level|
|5).RO membrane can wash automatically and reduce pollution|
|6).Water shortage protection for multi-stage pump|
|7).Production water conductivity meter can test the monitoring quality on line contionuosly.|
|8).Low operation Cost and Long life span|
|9). It is PC program controller|
|10).Easily control and Maintain|
|11).Auto membrane flushing|
|12).Environmental protection, Low power consumption|
|13) Auto flush/backwash|
|14) Low /high pressure protection|
Ion-exchange mixed-beded for water treatment
Ion-exchange for water treatment is a method to wipe off the electrolyte in water by use of selection and balancing principle to ion with kation and anion exchanging resin. The system is working with the principle of filling kation and anion resin in exchanging pole, using ion-exchange resin to exchange with calcium, magnesium and natrium ions to get high pure water. Ion-exchange resin is macromolecule compound,it is stable in water, acid, alkali and salt, does not melt. Resin is of large quantity exchanging, long wearable, good absorbing, small expanding, long life and etc.