Payment & Shipping Terms:
|Production Capacity:||Water Filtration Treatment System With Water Softener||Electrical Power:||220/380V 50/60Hz|
|Tank Material:||FRP/ Stainless Steel||Pipe Fitting:||SUS304/ U-PVC|
|Certification:||CE / SGS/ ISO9001||Operating Temperature:||5°C - 39°C|
|Desalination Rate:||>=97%||Application:||Industrial Water / Boiler Water|
water softener treatment systems,
softening water system
1000L/H Reverse Osmosis Water Filtration Treatment System with Water Softener
What is a Water Softener?
A water softener is an appliance that is fitted to the mains water supply to a home or commercial premises to remove dissolved minerals (hardness salts). These minerals form lime-scale in pipes and boilers, when the water is heated, and soap-scum in bath water, laundry appliances and sanitary-ware. They are usually fitted close to the mains water entry point in a house but can be sited almost anywhere. Modern domestic softeners are so compact that they can be easily installed under the kitchen sink.
What does a Water Softener do?
Water softeners use a process called ion exchange. The softener unit contains a column filled with beads of a resin which remove the dissolved calcium and magnesium ions from the hard water flowing through it, replacing them with sodium. Periodically, (typically once a day) the softener regenerates the resin by washing with brine (sodium chloride solution), carrying the calcium and magnesium to drain, and leaving fresh sodium ions on the resin ready for the next treatment cycle. Regeneration is usually triggered automatically by either an electronic timer or mechanical water flow meter. The unit has to be refilled with salt (in the form of granules, small tablets or blocks) typically once a month.
Water suppliers define the level of water hardness (total hardness) in mg/l (milligrams per litre) of calcium carbonate. The water supply is considered to be hard if it is above 200 mg/l. 60% of water supplies in the UK are hard and are typically 300 to 350 mg/l total hardness. Softening generally reduces the hardness to less than 10 mg/l.
An ion exchange system consists of a tank containing small beads of synthetic resin. The beads are treated to selectively adsorb either cations(positive) or anions(negative) and exchange certain ions based on their relative activity compared to the resin. This process of ion exchange will continue until all available exchange sites are filled, at which point the resin is exhausted and must be regenerated by suitable chemicals.
|2RNa + Ca2+ = R2Ca + 2Na+|
|2RNa + Mg2+ = R2Mg + 2Na+|
|R2Ca + 2NaCl = 2RNa + CaCl2|
|R2Mg + 2NaCl = 2RNa + MgCl2|
|1.Water softener use automatic control and semi-control .Pretreatment parts can adopt fiber glass or stainless steel material.|
|2.Water softener system has protected when no power, poor power, larger electrical current, leakage, short circuit.|
|3.Water softener price is compact, easy installation.|
|4.Water softener equipped with manual and auto control based on user needed.|
|5.Water softener system produce as per ISO and SGS standard and main parts accessories have obtained CE certification.|
|6. All the plants will be commissioning well. Make sure don't have any problem when arrived site.|
|7.What we provide not only the good products, but also our whole team, the quality, experience, and service.|
Welcome to send us inquiry if you're interested in our products! Thank you!^-^
Contact Person: Rose Chen