Payment & Shipping Terms:
|Raw Water Pump:||BJZ Lingxiao/ CNP Nanfang||High Pressure Pump:||CNP Nanfang|
|Motor:||TEFC, IEC Standard||Materials:||CDLF Stainless Steel|
|Aluminum Casing:||50HZ Or 60HZ, Single Phase Or 3-phase||Voltage:||220-240v /380-415v|
water iron removal system,
iron water treatment systems
Industrial frequency conversion water supply system with centrifugal pump
Frequency coversion water supply system is an intelligent pipe network relay boost (no pressure) equipment ,which can be set water pressure according to user need .if the pressure of pipe network water is higher than the set pressure, the pump unit is in a shutdown state, tap water is supplied through the connecting pipe Road directly to the user . When the water supply pressure of the municipal pipe network is lower than the set pressure, the equipment automatically is in the relay boost working condition. The unit constitute the closed-loop control system by the pressure sensor, the water pump and the constant voltage frequency conversion control cabinet. With the change of the water consumption, it will adjust the quantity of pumps and rotating speed,which is to keep the water supply pressure constant.
2. Product Details
Flow regulator is a sealed container, which can adjust automatically the quantity of running water pump and rotating speed of single pump according to the user changes in water consumption , so that can maintain the pump outlet pressure constantly. When the user water consumption is less than the amount of water of one water pump, there is one pump operating frequency coversion and speed control according to the change of water consumption. when the water consumption increases, the pressure of pipeline in system will be droped, then the the signal detected by pressure sensor be sent to the computer control unit , Through the computer to determine the operation, issued instructions to the inverter,control the pump motor, so that accelerate spin to ensure that the system pressure is constant. Otherwise when the water consumption is reduced, the pump speed slows down to maintain constant pressure. When the water consumption is greater than output water of one pump, the first pump switch to the frequency of operation and the second pump start the frequency control operation. when the water consumption is less than output water of two pumps ,it can automatically stop one or two pumps running. In the whole operation process, always keep the system constant pressure so that the pump always work in the efficient area, both to ensure that users constant pressure to supply water, but also save energy. Equipment does not need full-time operator.
|Characteristics of Equipment|
★Energy saving:Saving Electricity up to 30% -80%
★Environmental protection:Components water flow thought adopt stainless steel which can be used as food,to prevent Secondary pollution.
★Safety:Pevent Idle,low Water level,Cracked ,Water hammer,Backflow,Current overload
|Beautiful:The use of high-quality materials and professional design to make products more beautiful|
★Save money:There is no need to build pools and tanks ,not need to clean and
disinfect regularly.Saving more than 50% of the construction fee and the latter part of the cleaning and maintenance costs
|★Water pressure stability:The outlet pressure is detected by a real-time sensor.The use of frequency control is to ensure constant water pressure|
|★Take up less space:The equipment delivery by complete sets.The volume and Installation space is small|
|★low noise,Small vibration,Wide range of applications.|
|★Built-in dedicated inverter,High degree of intelligence|
|★The inverter records the current status before power off.The power will automatically restart power after 10 seconds.|
|★There is automatic alarm function.Emergency measures can be taken when a failure occurs.★|
|★It is easy to operate,install, repair and manage.Service life is long.|
3. Whole System Product Processing
Feed water(source water):
City water, river water, lake water, underground water(borehole, well), brackish water, sea water......
1. Electronic industry: Pre-filter for ultra pure water, chemical products and pure water
2. Food and beverage industry: filter for mineral water, wines and fruit juice
3. Medicine industry: filter for drug liquid, gases
4. Chemical industry: filter for organic solvent
5. Petroleum industry: filter for oil-field flooding
There are several kinds of consumables you need to replace regularly.
a. Quartz sand: replaced about every 15 months. 50kg/bag
b. Activated carbon: replaced about every 15 months. 25kg/bag
c. Resin: replaced about every 15 months. 25L/bag
d. PP Filter cartridge: replaced about every 1 month
e. Ro membrane: replaced about every 2 year
We suggest you buy 1- 2 years of PP filter cartridges together with machine. Because these PP filter cartridges need to replace every month.
Two-stage RO system
Automatic cleaning system
PE,stainless steel or FRP water tank
4. Contact us:
Add:Dehui Wanggang Science Park, Industrial 3 Road, Jiahe Wangwang, Baiyun District, Guangzhou, Guangdong Province, China.
Back home Click to view more related products
Contact Person: Rose Chen